Turbine Flow Meter
  • Turbine Flow Meter
  • Product Name :Liquid Turbine Flow Meter
    Brand :AFT
    Model NO. :AFT
    Send message

Liquid flows through the turbine housing causing an internal rotor to spin. As the rotor spins, an 
electrical signal is generated in the pickup coil. This signal is converted into engineering
units (liters, cubic meters,gallons etc.) on the local display where is applicable.Optional
accessory modules can be used to export the signal to other equipment.
Upon receipt, examine your meter for visible damage.The turbine is a precision measuring
instrument and should be handled carefully. Remove the protective plugs and caps for
a thorough inspection. If any items are damaged or missing, contact us.Make sure the
turbine flow model meets your specific needs. For your future reference, it might be useful to record this information on nameplate in the manual in case it becomes unreadable on the
turbine. Refer to the nameplate for your customized product’s specification. 


high-precision:generally:±1%,±0.5%R ,also can be up to ±0.2%R

Repeatability is good, short-term repeatability of up to 0.05%~0.2%, precisely because of good repeatability, such as regular calibration or online calibration can get high accuracy, in the trade settlement is the preferred choice of flow meter.

The output pulse frequency signal is suitable for the total amount calculation and the computer connection, and has no zero drift, and has strong anti-interference ability.

Can get a high frequency signal(3~4Khz), signal resolution is strong.

Range of wide, medium and large diameter up to 1:20, small diameter of 1:10.

Compact and light structure, convenient installation and maintenance, high flow capacity.

Application of high pressure measuring instrument, meter without opening, easy to make high pressure type instrument.

Special type of sensors can be designed according to the special needs of users, such as low temperature type, bidirectional type, well type, and special type of mixed sand etc .

Can be made into the type, suitable for large diameter measurement, small pressure loss, low price, can not flow out, easy installation and maintenance.

Technical Parameters

Implementation standards Turbine flowmeter sensor(JB/T9246~19999)
Calber&connection Thread:4,6,10,15,20,25,32,40;Flange:((15,20,25,32,40)50,65,80,100,125,150,200
Accuracy ±0.1%,±0.5%,±0.2%(Optional)
Range ratio 1:10;1:15;1:20
Sensore material SS304,SS316(L)etc
Working environment Medium temperature:-20℃~+120℃ Ambient temperature:-20℃~+20℃ Relative humidity:5%~90% Atmospheric pressure:86KPA~106KPA
Signal output Pulse ,4~20ma
Communication output RS485,HART
Working power supply A:DC 24V lithium battery
Signal line interface Basic type, Explosion proof type
Explosion proof grade Exia‖CT4 or Exd‖BT6
Protection level IP65 or higher

Online inquiry