Ultrasonic Flow Meter
  • Ultrasonic Flow Meter
  • Product Name :Handled Ultrasonic Flow Meter
    Brand :AFT
    Model NO. :AFT
    Origin:KaifengHenan
    Send message

         The AFT handled ultrasonic flow meter is designed to work with clamp-on transducers to enable the flow of a liquid within a closed pipe to be measured accurately without needing to insert any mechanical parts through the pipe wall or protrude into the flow system. Using ultrasonic transit time techniques the is controlled by a micro-processor system which contains a wide range of data that enables it to be used with pipes with an outside diameter ranging from 15mm up to 6000mm (depending on model) and constructed of almost any material. The instrument will also operate over a wide range of fluid temperatures.

Ultrasonic flow meter feature:
High Accuracy
Accuracy better than 1%.

Wide Measurement Range
Measurement range from DN15~DN6000mm

Rechargeable Power Supply
Built-in high-capacity NiMH rechargeable batteries will last more than 10 hours(Fully charged) .

Non invasion measurement
Can achieve measurement with clamp on sensors

Data Storage
32K BIT built-in data storagecan store two thousand rows of data

LCD display
LCD display can display the instant flowtotal flowflow velocity and working condition



Ultrasonic flow meter technical parameters:


Type Performance parameter

Transmitter

Principle
Ultrasonic transit-time principle, Four-byte IEEE754 floating arithmetic

Accuracy
Flow: Better than ±1%

Display
LCD display with Chinese, English, Italian language

Output
One OCT pule output(pules width 6-1000ms, Default 200ms)

Data interface
Isolation of 232 communication interface, can upgrade flowmeter through PC

Pipeline
Conditions

Pipe Material
Steel, Stainless steel, Cast iron, copper, PVC, aluminium, FRP etc.(liner allowed)

Diameter
15~6000mm

Installation
Upstream 10D,downstream 5D,30D away from the pump outlet(D for diameter)

Medium

Fluid
Water,sea water,acid liquid,beer,alcohol,oil and any other liquid that can spread sonic

Temperature
Temperature: -30~160℃

Turbidity
10000ppm and with little bubbles

Velocity
0~±10m/s

Operating
Environment

Temperature
Transmitter: -20~60℃; Transducer: -30~160℃

Humidity
Transmitter: 85%RH; transmitter protection grade: IP67

Power

Three internal 1.2V, 2000mAH rechargeable Ni-MH battery. Can work 12 hours fully charged. Can achieve continuous measurement with AC100-240V power adapter

Comsumption
1.5W

Case Material
Flame retardant ABS

Weight
Transmitter: 514g

Online inquiry